MiniVario^®

When every inch counts

The MiniVario^® is brilliant for narrow working widths.

With its infinitely adjustable working width between 0.8 and 6 m, the MiniVario^® from LEHNER was specially developed for use in viticulture and growing vegetables, hops, and asparagus.

With its powerful 12 V drive and patented stainless steel agitator, it tackles every task with gusto, and can spread virtually any type of granulate – e.g. fertiliser, grass, catch and cover crops, and other granular materials – in a targeted and optimum way. The MiniVario^® can work from either the front or rear, as the frame already features the necessary mounting holes.

Highlights of the MiniVario^® including:

Flexible working width from 0.8 to 6.0 m (up to 12 m as an option)
Operation via control console from the cab/driver’s seat – LAS 4 control panel with 2-line graphic display
Stepless adjustment of the spreading dosage via the control panel
Frame, valve, and spreading disc made from non-rusting stainless steel
Special patented agitator with separate drive
Visual and acoustic fault indication on the control panel
10-time autostart for agglomerated spreading material
Movable spreading disc allows one-sided spreading
Readiness (socket) for headland management available as standard
Water-resistant gear motors and cables

Fields

Sowing grass seed

with the MiniVario^® 110

Spreading cover crops

at narrow working widths

Spreading fertiliser

in the vineyard with the MiniVario^® 170

Technical Data:

Spreading width:	0.8 – 6 m
Motor power:	spreading disc: 60 W agitator: 150 W
Fuse:	25 A
Speed range:	spreading disc: 40 – 600 rpm agitator: 54 rpm
Power consumption:	When starting, up to 24 A Normal operation up to 13 A

Operating voltage:	12 to 15 volt
Operating temperature:	-10 to +70 °C
Storage temperature:	-30 to +70 °C
Battery cable:	5 m (4.0 mm²)
Control cable:	6 m , fixed connection to spreader, cable to control panel
Connections:	Power supply, control cable, headland management socket

Hopper capacity:	110 l
Dimensions (LxWxH):	490 x 585 x 1050 mm
Weight:	38 kg

request MiniVario 110

Hopper capacity:	170 l
Dimensions (LxWxH): :	690 x 610 x 1100 mm
Weight:	42 kg

request MiniVario 170

Special features of the MiniVario^®

Spreading with comfort and convenience – the LAS 4 control panel with empty indicator.

As well as setting the working width by infinitely adjusting the rotational speed of the spreading disc, all other switching functions are also controlled via the control panel. These include On/Off, setting the adjustment valve for spreading dosage, checking the voltage, etc. What’s more, the control panel issues a visual and acoustic warning when the hopper level is down to minimum or the valve is not in position. Enjoy even greater convenience with speed-dependent dosage via the AUTO-DOSIS control unit.

Stainless steel mixer with the patented LEHNER mixing system

Special agitator

The stainless steel agitator with patented LEHNER agitator system is driven by a separate motor. Thanks to the automatic breakaway, the agitator can overcome even high resistance without overloading the motor. This ensures that the free-flowing material is dispensed continuously.

Regulation of the flow rate of the spreading material

Electronic dosing

On the MiniVario^® , the flow rate of the spreading material is regulated directly on the control panel. The dosage can also be set and changed in this way while on the move.

Variable sideways spreading

Aligning the spreading disc diagonally changes the discharge point of the spreading material and enables optimum sideways spreading. This way, even one-sided spreading is problem-free using the MiniVario^®.

OPTIONAL: AUTO-DOSIS

AUTO-DOSIS automatically adjusts the valve position in line with the driving speed.

After you have selected the material, entered the desired spreading width and discharge rate per hectare, the AUTO-DOSIS automatically reacts to braking and acceleration manoeuvres and controls the dosing valve, keeping the discharge rate kg/ha constant.

1. AUTO-DOSIS via 7-pin signal socket
Here, the travel speed is recorded via the 7-pin signal socket on the tractor. In this version, the signal socket also provides the headland management system.

2. 2. AUTO-DOSIS via GPS receiver
The speed is determined by GPS and forwarded to the control panel.

Downloads

2. available downloads

1
2
3
4
5

Brochure

MiniVario^®

2.2 MB

Accessories

Battery cable with bracket (1x as standard)

Cable length 5 m. If you need a 12V supply on a further carrier vehicle, then we have the right battery cable with control panel bracket for this. Important: With each LEHNER spreader a battery cable with bracket is included in the scope of delivery.

AccoSat GPS receiver (Automatic dosing)

The AccoSat GPS receiver is a speed sensor based on DGPS and a 3D accelerometer. Thanks to this sensor fusion, the system reacts very quickly to acceleration and deceleration (setting off and braking), and automatically adjusts the slide position according to the speed.

Baffle plate for cover crops, adjustable

The angle of inclination of this baffle plate is adjustable, and so the cover crop can be dispensed exactly between grubber and roller (trailer). In addition, relatively light material for spreading (e.g. grass) is better protected from the wind. Please be aware that separate spreading tables apply to the baffle plate.

Brackets

Pick-up bracket, adjustable

The attachment is hot-dip galvanised, exceptionally versatile and easy to use. It can be mounted on virtually all pick-up models without problem and is extremely weather and corrosion resistant. In addition, the four solid M20 additional feet with 250-mm spindles give the 28-kg, extremely stable attachment more stability and better weight distribution.

Bracket for lawn mower tractor

The upper pipe is mounted in place of the hopper, while the lower pipe is clipped onto the springs. Generally, the support still has to be adapted to the carrier vehicle; it is not suitable for every type of tractor without some adjustment.

ATV/quad holder “Rear”

This holder is attached to the steel luggage carrier of an ATV or quad, and thanks to its design it ensures a low centre of gravity for the vehicle.

Gallery

Our products in use - customer pictures can also show custom-made products.

MiniVario^®

When every inch counts