ÖlTiger®

Safety and reliably where it’s happening

Drive with 12V
Spread width 0.5 to 2 metres
LAS as standard

Spreading oil binding agents precisely, efficiently and quickly with fire brigade or municipal vehicles.

Firstly, the ÖlTiger® minimises the potential risks to personnel when dispensing oil binding agents. Secondly, spreading by machine is much faster, more even, and more user-friendly than spreading by hand. This saves on materials (up to 70% less binding agent) and therefore also on subsequent disposal costs. The ÖlTiger® can be fitted to practically all vehicles using a 12/24 V supply, e.g. cars, lorries, road sweepers, wheel loaders, etc. and is fully ready for use in just a few minutes.

Best prepared for every eventuality:

  • Spreading width 0.5 to 2.0 m
  • Transparent hopper with residue emptying (capacity 110 l: oil binding agents for up to 1200 m²)
  • LAS control panel as standard
  • 12 V drive – 24 V also possible using transformer (accessory) • Valve and spreading disc made from non-rusting stainless steel
  • For front or rear installation
  • OPTIONAL: Saline agitator in the hopper for very slow-flowing oil binding agent

Technical data

Spreading width: 0.5 – 2.0 m
Motor power: 60 W
Speed range: 70 – 660 rpm
Power consumption: When starting, up to 15 A, normal operation up to 7 A
Fuse: 25 A
Operating temperature: -10 to +50 °C
Storage temperature: -30 to +50 °C
Battery cable: 5 m (2.5 mm²)
Control cable: 6 m
ÖlTiger 110
Hopper capacity: 110 l
Dimensions (LxWxH): 490 x 585 x 1050 mm
Weight: 30 kg
ÖlTiger 170
Hopper capacity: 170 l
Dimensions (LxWxH): 690 x 610 x 1100 mm
Weight: 34 kg

Special features of the ÖlTiger®

Control panel

LAS control panel as standard For setting the spreading width by steplessly regulating the speed of the spreading disc, and for controlling all switching functions from the driver’s seat, the ÖlTiger is supplied with a LAS control unit as standard.

spreading disc

Spreading dosage On the ÖlTiger®, the spreading rate is adjusted directly on the machine using the dosing valve (1). The position at which the material strikes the spreading disc can also be adjusted (2) to ensure the homogeneous distribution of different oil binding agents.

Brochure

ÖlTiger®

ÖlTiger®

0.82 MB