TendoMat®
Electric fence winder
Wind and unwind fencing wire without the usual effort
With the TendoMat®, painstaking, time-consuming, and tiring winding and unwinding of fencing wire is now a thing of the past. Fitted quickly and easily to a tractor, all-terrain vehicle, car trailer or quad bike, even large areas of farmland can be fenced in record time (2 ha in just 20 min) – without muscle power.
Equipment features of the TendoMat®:
- 12 V electric motor for unwinding (bottom reel) and winding (top reel) the wire
- Metal parts of non-rusting stainless steel
- Slip clutch for overload protection
- Battery and control cable included in delivery
- Control panel as standard
Technical data
| Dimensions (LxWxH): | 770 x 380 x 900 mm |
| Motor power: | 100 W |
| Fuse: | 25 A |
| Winding speed: | ca. 80 – 130 m/min |
| Speed range: | approx. 70 – 136 U/min |
| Power consumption: | Normal operation up to 18 A |
| Operating temperature: | -10 to +50 °C |
| Storage temperature: | -30 to +50 °C |
| Battery cable: | 5 m (4.0 mm²) |
| Control cable: | 6 m |
Special features of the TendoMat®
Control panel as standard
The control panel for switching on/off and selecting a fast/slow winding speed is included with every TendoMat®.
12 V operated
With the TendoMat® wires up to 1 km long (depending on wire diameter) can be pulled directly out of the fence posts and wound back up.
Downloads
Brochure
TendoMat®
2.52 MB
Accessories
Battery cable with bracket (1x as standard)
If you need a 12V supply on a further carrier vehicle, then we have the right battery cable with control panel bracket for this. Important: With each LEHNER spreader a battery cable with bracket is included in the scope of delivery.
Stainless steel replacement reel
The TendoMat’s scope of delivery includes two stainless steel reels. Replacement reels, Ø 350 mm, are optionally available.
Trolley
Trolley for easy parking and transport of the spreader. Dimensions (LxWxH): 60.5 x 30.5 x 14.5 cm
Brackets
ATV/quad holder “Heck”
This holder is attached to the steel luggage carrier of an ATV or quad, and thanks to its design it ensures a low centre of gravity for the vehicle.
Tailboard holding device
By means of the tailboard holding device, the spreader is easy to attach to a straight, unbent tailboard, and is fixed using two set screws.
Pick-up attachment
The pick-up attachment is height-adjustable. The distance between top edge of tailgate and top edge of ball head is adjustable between 590 mm and 780 mm, e.g. Ford Ranger: 700 mm, Nissan Navara: 760 mm, Isuzu/Opel Campo Sports Cab: 735 mm, Mitsubishi L200: 735 mm, Dodge RAM: 740 mm (trailer coupling right at the back), Land Rover: 830 mm (is too large)
Gallery
Our products in use - customer pictures can also show custom-made products.
