TUBARO®

For smaller rollers in road construction

Drive with 12V
Spread width 0.8 to 1.4 metres
Up to max. 45 kg per minute
Warning via Signal
LAS 4 Control panel
Chippings up to 6 mm

The TUBARO® leaves no trance of spreading material.

The TUBARO® was developed as a rear-end attachment for smaller rollers (working width from 0.8 to 1.4 m) for asphalt compaction. It can dispense sand and grit much more homogeneously than disc spreaders, which are more susceptible to wind. Stepless dosage adjustment (up to 45 kg/min) and monitoring directly from the control panel.

Further advantages of the TUBARO® at a glance:

  • Saline agitator with 12 V as standard
  • LAS 4 control panel with 2-line graphic display and visual/acoustic fault indication as standard
  • Stepless adjustment of the spreading dosage via the control panel
  • Valve and agitator of non-rusting stainless steel
  • Transparent hopper with hole for residue emptying
  • Water-resistant gear motors and cables

Technical data

Spreading width:0.8 – 1.4 m
Motor power:150 W
Fuse:25 A
Speed range:40 – 66 rpm
Power consumption:When starting, up to 24 A, normal operation up to 13 A
Operating voltage:12 to 15 V
Operating temperature:-10 to +70 °C
Storage temperature:-30 to +70 °C
Battery cable:5 m (4.0 mm²)
Control cable:6 m; fixed connection to spreader, cable to control panel
TUBARO 110
Hopper capacity:110 l
Dimensions (LxWxH):485 x 570 x 1050 mm
Weight:40 kg
TUBARO 110
Hopper capacity:170 l
Dimensions (LxWxH):626 x 700 x 1070 mm
Weight:42 kg

Special features of the TUBARO®

Spreading with comfort and convenience
The LAS 4 control panel of the TUBARO® makes light work of spreading:

The TUBARO® is controlled directly from the driver’s seat, using the control panel. The dosage is adjusted based on the rotational speed and valve position, and can also be changed while on the move. What’s more, the empty indicator and valve monitor ensure a homogeneous discharge rate.

Saline agitator
Saline agitator

Saline agitator with 12 V drive for slow-flowing material. If the machine is used for gritting, the upper bracket can be removed to take the strain off the motor.

Downloads

Brochure

TUBARO®

2.56 MB