TendoMat®
Electric fence winder
Wind and unwind fencing wire without the usual effort
With the TendoMat®, painstaking, time-consuming, and tiring winding and unwinding of fencing wire is now a thing of the past. Fitted quickly and easily to a tractor, all-terrain vehicle, car trailer or quad bike, even large areas of farmland can be fenced in record time (2 ha in just 20 min) – without muscle power.
Equipment features of the TendoMat®:
- 12 V electric motor for unwinding (bottom reel) and winding (top reel) the wire
- Metal parts of non-rusting stainless steel
- Slip clutch for overload protection
- 2 aluminum wheels (Capacity: approx. 2 km wire length each with 2.5 mm wire), battery and control cable included in delivery
- Control panel as standard
Technical data
Dimensions (LxWxH): | 770 x 380 x 900 mm |
Motor power: | 100 W |
Fuse: | 25 A |
Winding speed: | ca. 80 – 130 m/min |
Speed range: | approx. 70 – 136 U/min |
Power consumption: | Normal operation up to 18 A |
Operating temperature: | -10 to +50 °C |
Storage temperature: | -30 to +50 °C |
Battery cable: | 5 m (2.5 mm²) |
Control cable: | 6 m |
Special features of the TendoMat®
Control panel as standard The control panel for switching on/off and selecting a fast/slow winding speed is included with every TendoMat®.
12 V operated With the TendoMat® wires up to 1 km long (depending on wire diameter) can be pulled directly out of the fence posts and wound back up.
Downloads
Brochure
TendoMat®
0.8 MB
Accessories
Battery cable with bracket (1x as standard)
Cable length 5 m. If you need a 12V supply on a further carrier vehicle, then we have the right battery cable with control panel bracket for this. Important: With each LEHNER spreader a battery cable with bracket is included in the scope of delivery.
Aluminum replacement reel
The TendoMat’s scope of delivery includes two aluminum reels. Replacement reels, Ø 350 mm, are optionally available.
Trolley
Trolley for easy parking and transport of the spreader. Dimensions (LxWxH): 60.5 x 30.5 x 14.5 cm
Brackets
Pick-up bracket, standard
The pick-up attachment is height-adjustable. The distance between top edge of tailgate and top edge of ball head is adjustable between 590 mm and 780 mm, e.g. Ford Ranger: 700 mm, Nissan Navara: 760 mm, Isuzu/Opel Campo Sports Cab: 735 mm, Mitsubishi L200: 735 mm, Dodge RAM: 740 mm (trailer coupling right at the back), Land Rover: 830 mm (is too large)
Cultivator bracket, standard
For sowing cover crops, we recommend that the SuperVario® is installed directly on the soil cultivator, using four bolts. The installation should be such that the seed falls behind the device onto the roller or into the freshly worked ground.Grubber bracket, standard
Three-Point-Frame CAT 0, CAT I, or CAT II
Headstock for attaching to the compression and lifting links of the hydraulics (front or rear installation). Shoulder dimensions: CAT 0: 530 mm, CAT I: 683 mm, CAT II: 825 mm